Beneath the gear level, assemblies for heater and mirrors are provided. The right side of the vertical dash holds two screws, which need to be removed, with the help of a screw-driver.The screws on the dash are then gain fixed with the help of the screw-driver.Undo the connection of the negative cable in the battery. But it is not easy to master everything in it. The wires are connected to it. You do not require complicated instruments for this. The things you generally will make use of are a screw-driver, wrench of 10 millimeter, wrench of Torx, panel tool, adapter used in connection of wirings, adapter of faceplate type. If you are not sure of the process do it with the help of an expert. 

Try it with precautions. This has to be removed with the help of a screw-driver. The screws which were present on the bracket are screwed to position with the help of the wrench. This can be done with the help of a wrench. Cup-holder has to be drawn out.The procedure is in a simplified manner. Finally the negative cable of the battery is connected with the help of the wrench. The two screws present below assembly are removed. Then the cup holder screws are put back in position. It has to be removed with the help of a wrench of the Torx.The stereo is dragged and the wirings are detached. These are removed with the help of a peer tool. 

Now the connections of the wires are made between the cooper and the adapter. The following paragraphs will discuss in detail the sequence of steps involved in the process.There are four screws located on the stereo brackets corner.About Author Jack Wylde :. This awareness in necessary when you work electronic power operated devices. We can get updated still learning it like professionals is not possible in one day. It has new devices which ease the life style of human beings. Now glove box is opened. Once it is done, the stereo to be newly introduced is placed into the adapters opening. Thus it is always good to try rather than giving every job to the experts or the professionals. The device will bear some identification marks to indicate the connections. The article will teach you how to replace a mini cooper radio. 

Next the adapter of the faceplate type is inserted into an opening after the radio is removed. It is necessary to follow  the precautionary steps in order to avoid unexpected accidents. But we can always try out some things on our own. But this will give you experience and knowledge on that particular device.the panel below the column of the steering is dragged. The technology is improving day by day. Dash is placed back and glove box is closed. At first we do make many errors. The left side of the vertical dash holds two screws, which need to be removed, with the help of a screw-driver. Cup holder is closed. There will be two screws provided in the holders. The assemblies of the heater and the mirror are set again properly.Thus the article on how to replace a mini cooper radio would have given the simple process.Technology has everything enclosed in it.